Optical Fiber Fusion Splicing and Its Applications

Fusion Splicing is the method to participate two Optical Dietary fiber Cables (OFC) by heating system them. Fusion Splicer is an instrument used to perform the same task. Blend Slicer is available in two styles Portable and Set. Portable model is preferred because it can be carried anywhere, high is need to join OFCs.

Fusion Splicing needs to be very accurate and precise. If there is any error in splicing, light will scatter or reflect and loss of data occurs. Two OFCs are linked end to end and fused to join. Fusion Slicer uses a source of high temperature such as Tungsten Wire, Light Amplification by Controlled Emission of Radiation (LASER) Beam, Gas Flame or the arc.

Material of optical fiber cable is fused at high heat. Fused state only touches the contents, it avoid change its condition or composition or characteristics. This kind of is very important because we don't desire change in condition or characteristics of the fiber wire. If some of them is altered while splicing, data loss will certainly occur, which is unwelcome.

Optical Fiber Cable is a superior cable made from several layer. Introduction to Fusion Splicers slicing should join each layer to the respective layer only of two fiber wires. Especially the Core, which carries light needs to be very flat at joint. Curvature can deflect or diffract light light beam. Splice loss occurred scheduled to splicing is immediate effect of alignment. Applying special type of OFC Stripper and Cutter, ends are cut carefully. Flatness is observed by Microscopic lense or Zooming Lenses. They may be joint end to end and set in fusion slicer. Slicer joins them quickly. The joint is allowed to get cool and firm. Splice Protector is applied on the joint.

Today, Fusion Slicers usually use LASER or Electric power Arc. Gas Flame can leave traces of gas or combustion bi-products, which may alter composition of OFC. LASER and Electric powered Arc are clean causes of heat. LASER slicer is preferred because it can work on Battery and quickly slice OFCs. Slicers can be programmed to quickly slicer similar type of OFCs. Portable models usually use LASER as heat source. They quickly heat and splice OFCs in no time.

Selected advanced slicers have Microscopic lense integrated. Which ensures that there would be no wrong alignment or curvity? With TFT LCD Display, it is possible to visualize slicing process in 2 Dimensions, which ensures it will go in right way. Further, they can check for last slicing and log the result for future goal. Computer Connectivity can help you track record progress and log record.

Fusion Slicers are thoroughly employed by Telecommunication Companies. Optic Fiber Network proves to be very reliable, effective and low power communication media. Data is secure and loss is minimal. Hence more and more telecommunication companies are growing their network by OFCs. New form of Ultra Fast internet connection exists with OFCs only. Mobile Systems are preferably linked by OFCs, as Microwave Links may get interrupted. Therefore Fusion Slicer performs a great deal to sign up for OFCs for the network.